stchaind Commands Part 2
This document is the second part of stchaind commands for Stratos Chain.
Register Module🔗︎
-create-resource-node🔗︎
Create a new resource node
Usage:
stchaind tx register create-resource-node [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--amount string Amount of coins to bond
--details string The node's (optional) details
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for create-resource-node
--identity string The (optional) identity signature (ex. UPort or Keybase)
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--moniker string The node's name
--network-address string The address of the PP node
--node-type uint32 The value of node_type is determined by the three node types (storage=4/database=2/computation=1) and their arbitrary combinations.
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
--pubkey string The resource node's Protobuf JSON encoded public key
--security-contact string The node's (optional) security contact email
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
--website string The node's (optional) website
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register create-resource-node \
--network-address=<network-address> \
--amount=<amount> \
--pubkey=<pubkey of resource node> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--moniker=<name of resource node> \
--node-type=<resource node type, int 1~7>
Transaction example:
stchaind tx register create-resource-node \
--network-address=stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv \
--amount=10stos \
--pubkey=stsdspub1zcjduepqmrsput8d8c4tqeztrwzjjntg0jdgvmuyd5pur2g0chpxv5cccdsq4drddm \
--from=st12adksjsd7gcsn23h5jmvdygzx2lfw5q4kgq5zh \
--moniker=resource-node0 \
--node-type=1 \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
There are three ways to check if the new resource node is in the resource-node list:
- Client Command
- REST API
- GRPC Command
Client Command:
stchaind query register get-resource-node --network-address=stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv
Response:
creation_time: "2023-01-10T16:48:24.591781632Z"
description:
details: ""
identity: ""
moniker: resource-node0
security_contact: ""
website: ""
network_address: stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv
node_type: 1
owner_address: st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh
pubkey:
'@type': /cosmos.crypto.ed25519.PubKey
key: 2OAeLO0+KrBkSxuFKU1ofJqGb4RtA8GpD8XCZlMYw2A=
status: BOND_STATUS_BONDED
suspend: true
tokens: "10000000000000000000"
REST API:
Response:
{
"height": "7",
"result": {
"network_address": "stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv",
"pubkey": {
"type": "tendermint/PubKeyEd25519",
"value": "2OAeLO0+KrBkSxuFKU1ofJqGb4RtA8GpD8XCZlMYw2A="
},
"suspend": true,
"status": 3,
"tokens": "10000000000000000000",
"owner_address": "st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh",
"description": {
"moniker": "resource-node0",
"identity": "",
"website": "",
"security_contact": "",
"details": ""
},
"creation_time": "2023-01-10T16:48:24.591781632Z",
"node_type": 1,
"bonded_deposit": {
"denom": "wei",
"amount": "10000000000000000000"
},
"un_bonding_deposit": {
"denom": "wei",
"amount": "0"
},
"un_bonded_deposit": {
"denom": "wei",
"amount": "0"
}
}
}
GRPC Command:
grpcurl -plaintext -d '{"network_addr":"stsds1m9fhlyy2eug7kcgrqfdxxxvnscp5qdvut6g4xz","query_type":"0" }' 127.0.0.1:9090 stratos.register.v1.Query.DepositByNode
Note:
query_type = 0 query the deposit info of both resource nodes or meta and nodes with this account address
query_type = 1 query the deposit info of only meta node with this account address
query_type = 2 query the deposit info of only resource node with this account address
Response:
{
"deposit_info": {
"network_address": "stsds1m9fhlyy2eug7kcgrqfdxxxvnscp5qdvut6g4xz",
"pubkey": {
"type_url": "/cosmos.crypto.ed25519.PubKey",
"value": "CiD37kGSAjc+jRvAqaphnkKNarZo6KePzYmp1ViQxMHVvg=="
},
"suspend": true,
"status": "BOND_STATUS_BONDED",
"tokens": "2003000000000000000000",
"owner_address": "st18986jyng5vsprmtzkdxla80jrw7qyc6wl73h0u",
"description": {
"moniker": "stsds1m9fhlyy2eug7kcgrqfdxxxvnscp5qdvut6g4xz",
"identity": "",
"website": "",
"security_contact": "",
"details": ""
},
"creation_time": {
"seconds": "1685729968",
"nanos": 908306425
},
"node_type": 4,
"bonded_deposit": {
"denom": "wei",
"amount": "2003000000000000000000"
},
"un_bonding_deposit": {
"denom": "wei",
"amount": "0"
},
"un_bonded_deposit": {
"denom": "wei",
"amount": "0"
}
}
}
-update-resource-node🔗︎
Update a resource node info
Usage:
stchaind tx register update-resource-node [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--details string The node's (optional) details
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for update-resource-node
--identity string The (optional) identity signature (ex. UPort or Keybase)
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--moniker string The node's name
--network-address string The address of the PP node
--node-type uint32 The value of node_type is determined by the three node types (storage=4/database=2/computation=1) and their arbitrary combinations.
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
--security-contact string The node's (optional) security contact email
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
--website string The node's (optional) website
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register update-resource-node \
--network-address=<resourceNode_address> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--moniker=<name of resource node> \
--node-type=<resource node type, int 1~7>
Transaction example:
stchaind tx register update-resource-node \
--network-address=stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv \
--from=st12adksjsd7gcsn23h5jmvdygzx2lfw5q4kgq5zh \
--moniker=resource-nodeupdate \
--node-type=7 \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
Check if the new resource node info has been updated.
stchaind query register get-resource-node --network-address=stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv
Response:
creation_time: "2023-01-10T18:16:14.738068297Z"
description:
details: ""
identity: ""
moniker: resource-nodeupdate
security_contact: ""
website: ""
network_address: stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv
node_type: 7
owner_address: st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh
pubkey:
'@type': /cosmos.crypto.ed25519.PubKey
key: 2OAeLO0+KrBkSxuFKU1ofJqGb4RtA8GpD8XCZlMYw2A=
status: BOND_STATUS_BONDED
suspend: true
tokens: "10000000000000000000"
-update-resource-node-deposit🔗︎
update resource node's deposit
Usage:
stchaind tx register update-resource-node-deposit [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for update-resource-node-deposit
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--network-address string The address of the PP node
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--deposit-delta string Deposit change of coins to be made (always positive like 100000gwei)
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register update-resource-node-deposit \
--network-address=<resource_node_address> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--deposit-delta=<delta_amount> \
--gas=auto
Transaction example:
stchaind tx register update-resource-node \
--network-address=stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv \
--from=st12adksjsd7gcsn23h5jmvdygzx2lfw5q4kgq5zh \
--moniker=resource-nodeupdate \
--node-type=7 --chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei
-remove-resource-node🔗︎
remove a resource node
Usage:
stchaind tx register remove-resource-node [flag] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for remove-resource-node
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--network-address string The address of the PP node
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register remove-resource-node \
--network-address=<resource_node_address> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend>
Transaction example:
stchaind tx register remove-resource-node \
--network-address=stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv \
--from=st12adksjsd7gcsn23h5jmvdygzx2lfw5q4kgq5zh \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
Check the status update of the resource node
Response:
{
"height": "173",
"result": {
"network_address": "stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv",
"pubkey": {
"type": "tendermint/PubKeyEd25519",
"value": "2OAeLO0+KrBkSxuFKU1ofJqGb4RtA8GpD8XCZlMYw2A="
},
"suspend": true,
"status": 2,
"tokens": "10000000000000000000",
"owner_address": "st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh",
"description": {
"moniker": "resource-nodeupdate",
"identity": "",
"website": "",
"security_contact": "",
"details": ""
},
"creation_time": "2023-01-10T18:16:14.738068297Z",
"node_type": 7,
"bonded_deposit": {
"denom": "wei",
"amount": "0"
},
"un_bonding_deposit": {
"denom": "wei",
"amount": "10000000000000000000"
},
"un_bonded_deposit": {
"denom": "wei",
"amount": "0"
}
}
}
-create-meta-node🔗︎
Create a new meta node
Usage:
stchaind tx register create-meta-node [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--amount string Amount of coins to bond
--details string The node's (optional) details
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for create-meta-node
--identity string The (optional) identity signature (ex. UPort or Keybase)
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--moniker string The node's name
--network-address string The address of the PP node
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
--pubkey string The resource node's Protobuf JSON encoded public key
--security-contact string The node's (optional) security contact email
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
--website string The node's (optional) website
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register create-meta-node \
--network-address=<network-address> \
--amount=<amount> \
--pubkey=<pubkey of meta node> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--moniker=<name of resource node>
Transaction example:
stchaind tx register create-meta-node \
--network-address=stsds1faej5w4q6hgnt0ft598dlm408g4p747y4krwca \
--amount=10stos \
--pubkey=stsdspub1zcjduepqv7sj69c52rsdu5m8nk6tg4v5y8fh43w2hl9aa7mp3qgr9ym0feyshrc4wv \
--from=st12adksjsd7gcsn23h5jmvdygzx2lfw5q4kgq5zh \
--moniker=meta-node0 \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
-meta-node-reg-vote🔗︎
vote for the registration of a new meta node
Usage:
stchaind tx register meta-node-reg-vote [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--candidate-network-address string (default "The network address of the candidate PP node")
--candidate-owner-address string (default "The owner address of the candidate PP node")
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for meta-node-reg-vote
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
--opinion Opinion of the vote for the registration of Meta node.
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
--voter-network-address string (default "The address of the PP node that made the vote.")
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Warning
A newly-created meta node needs 7 days by default to be voted by other active meta nodes
Example:
Usage:
stchaind tx register meta-node-reg-vote \
--candidate-network-address=<candidate-network-address> \
--candidate-owner-address=<candidate-owner-address> \
--opinion=<true|false> \
--voter-network-address=<voter-network-address> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend>
Transaction example:
stchaind tx register meta-node-reg-vote \
--candidate-network-address=stsds1faej5w4q6hgnt0ft598dlm408g4p747y4krwca \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--candidate-owner-address=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--opinion=true \
--voter-network-address=stsds13yakj2xgzzdfcw7kd5gtfcfv2k6sn5eg4vdfem \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei
-update-meta-node🔗︎
Update meta node info
Usage:
stchaind tx register update-meta-node [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--details string The node's (optional) details
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for update-meta-node
--identity string The (optional) identity signature (ex. UPort or Keybase)
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--moniker string The node's name
--network-address string The address of the PP node
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
--security-contact string The node's (optional) security contact email
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
--website string The node's (optional) website
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register update-meta-node \
--network-address<network-address> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--moniker=<name of meta node>
Transaction example:
stchaind tx register update-meta-node \
--network-address=stsds1faej5w4q6hgnt0ft598dlm408g4p747y4krwca \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--moniker=meta-node \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
-remove-meta-node🔗︎
Remove an meta node
Usage:
stchaind tx register remove-meta-node <meta_node_address> <owner_address> [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
-b, --broadcast-mode string Transaction broadcasting mode (sync|async|block) (default "sync")
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fees string Fees to pay along with transaction; eg: 10gwei
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate required gas automatically (default 200000) (default "200000")
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices to determine the transaction fee (e.g. 10gwei)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible and the node operates offline)
-h, --help help for remove-meta-node
--indent Add indent to JSON response
--keyring-backend string Select keyring's backend (os|file|test) (default "os")
--ledger Use a connected Ledger device
--memo string Memo to send along with transaction
--node string <host>:<port> to tendermint rpc interface for this chain (default "tcp://localhost:26657")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--trust-node Trust connected full node (don't verify proofs for responses) (default true)
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register remove-meta-node \
--network-address=<meta_node_address> \
--from=owner_address> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--gas=auto
Transaction example:
stchaind tx register remove-meta-node \
--network-address=stsds1faej5w4q6hgnt0ft598dlm408g4p747y4krwca \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
Check if the meta node has been removed from the meta-node list using REST API
stchaind query register get-meta-node --network-address=stsds1faej5w4q6hgnt0ft598dlm408g4p747y4krwca
Response:
node:
creation_time: "2023-01-10T19:45:09.674241234Z"
description:
details: ""
identity: ""
moniker: meta-node0
security_contact: ""
website: ""
network_address: stsds1faej5w4q6hgnt0ft598dlm408g4p747y4krwca
owner_address: st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh
pubkey:
'@type': /cosmos.crypto.ed25519.PubKey
key: Z6EtFxRQ4N5TZ520tFWUIdN6xcq/y977YYgQMpNvTkk=
status: BOND_STATUS_UNBONDING
suspend: false
tokens: "10000000000000000000"
-update-meta-node-deposit🔗︎
update meta node's deposit
Usage:
stchaind tx register update-meta-node-deposit [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for update-meta-node-deposit
--incr-deposit string Boolean indicator of increase/decrease of deposit delta, true for increase and false for decrease
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--network-address string The address of the PP node
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--deposit-delta string Deposit change of coins to be made (always positive like 100000gwei)
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx register update-meta-node-deposit \
--network-address=<meta_node_address> \
--from=<owner_address> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--deposit-delta=<delta_amount> \
--incr-deposit=<true|false>
Transaction example:
stchaind tx register update-meta-node-deposit \
--network-address=stsds1faej5w4q6hgnt0ft598dlm408g4p747y4krwca \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--deposit-delta=100gwei \
--incr-deposit=true \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
-get-resource-nodes🔗︎
Query details about an individual resource node by its network address
Usage:
stchaind query register get-resource-node [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for get-resource-node
--network-address string The address of the PP node
-o, --output string Output format (text|json) (default "text"
Example:
Query by network-address:
Transaction example:
stchaind query register get-resource-node --network-address=stsds1gl9ywg6jdfdgcja70ffum4ectq4fmt26ay4znv
-get-meta-nodes🔗︎
Query all meta nodes by network id or moniker
Usage:
stchaind query register get-meta-node [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for get-meta-node
--network-address string The address of the PP node
-o, --output string Output format (text|json) (default "text")
Example:
Query by network address:
Transaction example:
stchaind query register get-meta-node --network-address=stsds14c3em44vlh276cujnr2ez802uyjyeqrrsu9fuh
-get-resource-count🔗︎
Query the total number of bonded resource nodes
Usage:
stchaind query register get-resource-count [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for get-resource-count
-o, --output string Output format (text|json) (default "text")
Example:
-get-meta-count🔗︎
Query the total number of bonded meta nodes
Usage:
stchaind query register get-meta-count [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for get-meta-count
-o, --output string Output format (text|json) (default "text")
Example:
Example:
-register-params🔗︎
Query values set as register parameters
Usage:
stchaind query register params [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for params
-o, --output string Output format (text|json) (default "text")
Example:
stchaind query register params
bond_denom: wei
max_entries: 16
resource_node_reg_enabled: true
unbonding_completion_time: 1209600s
unbonding_threashold_time: 15552000s
SDS Module🔗︎
-upload (transaction)🔗︎
Create and sign a file upload tx
Usage:
stchaind tx sds upload [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--file-hash string The hash of uploaded file
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for upload
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
--reporter string The reporter address of meta node that reported the file
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
--uploader string The owner address of resource node that uploaded the file
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx sds upload \
--file-hash=<file hash> \
--uploader=<file uploader, owner address of resource node> \
--reporter=<file reporter, meta node address> \
--from=<Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend>
Transaction example:
stchaind tx sds upload \
--file-hash=001A1FC0B82DD3B0353B59E90388EEA2B73DEECA872955B414EBC99ECD3E3C1F \
--uploader=st16uzr20lx072gexwjuvg94hz3t8y73u4085s9sw \
--reporter=stsds14c3em44vlh276cujnr2ez802uyjyeqrrsu9fuh \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
-prepay🔗︎
Create and sign a prepay tx
Usage:
stchaind tx sds prepay [from_address] [coins] [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for prepay
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx sds prepay <from_address, Name|address of private key> <coins> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend> \
--gas=auto
Transaction example:
stchaind tx sds prepay st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh 10stos \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
-upload (query)🔗︎
Query uploaded file info by hash
Usage:
stchaind query sds upload [file_hash] [flags]
Flags:
--count-total count total number of records in upload to query for
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for upload
--limit uint pagination limit of upload to query for (default 100)
--offset uint pagination offset of upload to query for
-o, --output string Output format (text|json) (default "text")
--page uint pagination page of upload to query for. This sets offset to a multiple of limit (default 1)
--page-key string pagination page-key of upload to query for
--reverse results are sorted in descending order
Example:
Transaction example:
-sds-params🔗︎
Query values set as sds parameters
Usage:
stchaind query sds params [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for params
-o, --output string Output format (text|json) (default "text")
Example:
Pot Module🔗︎
-foundation-deposit🔗︎
Deposit to foundation account
Usage:
stchaind tx pot foundation-deposit [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--amount string Amount of coins to withdraw
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for foundation-deposit
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx pot foundation-deposit \
--amount=<amount> \
--from=<from_address, Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend>
Transaction example:
stchaind tx pot foundation-deposit \
--amount=40000stos \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei
-withdraw🔗︎
withdraw POT reward
Usage:
stchaind tx pot withdraw [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--amount string Amount of coins to withdraw
-b, --broadcast-mode string Transaction broadcasting mode (sync|async|block) (default "sync")
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fees string Fees to pay along with transaction; eg: 10gwei
--from string Name or address of private key with which to sign
--gas string gas limit to set per-transaction; set to "auto" to calculate required gas automatically (default 200000) (default "200000")
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices to determine the transaction fee (e.g. 10gwei)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible and the node operates offline)
-h, --help help for withdraw
--indent Add indent to JSON response
--keyring-backend string Select keyring's backend (os|file|test) (default "os")
--ledger Use a connected Ledger device
--memo string Memo to send along with transaction
--node string <host>:<port> to tendermint rpc interface for this chain (default "tcp://localhost:26657")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--target-address string The target account where the money is deposited after withdraw
--trust-node Trust connected full node (don't verify proofs for responses) (default true)
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx pot withdraw \
--amount=<amount to withdraw> \
--target-address=<wallet address of reciever> \
--from=<from_address, Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend>
Transaction example:
stchaind tx pot withdraw \
--amount=100gwei \
--target-address=st1sqzsk8mplv5248gx6dddzzxweqvew8rtst96fx \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh --chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
-legacy-withdraw🔗︎
Temporarily used to withdraw POT reward recorded by legacy wallet address
Usage:
stchaind tx pot legacy-withdraw [flags]
Flags:
-a, --account-number uint The account number of the signing account (offline mode only)
--amount string Amount of coins to withdraw
--dry-run ignore the --gas flag and perform a simulation of a transaction, but don't broadcast it
--fee-account string Fee account pays fees for the transaction instead of deducting from the signer
--gas string gas limit to set per-transaction; set to "auto" to calculate sufficient gas automatically (default 200000)
--generate-only Build an unsigned transaction and write it to STDOUT (when enabled, the local Keybase is not accessible)
-h, --help help for legacy-withdraw
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--ledger Use a connected Ledger device
--note string Note to add a description to the transaction (previously --memo)
--offline Offline mode (does not allow any online functionality
-o, --output string Output format (text|json) (default "json")
-s, --sequence uint The sequence number of the signing account (offline mode only)
--sign-mode string Choose sign mode (direct|amino-json), this is an advanced feature
--target-address string The target wallet address to deposit into after withdrawing
--timeout-height uint Set a block timeout height to prevent the tx from being committed past a certain height
-y, --yes Skip tx broadcasting prompt confirmation
In testing phase, --keyring-backend="test"
Example:
Usage:
stchaind tx pot legacy-withdraw \
--amount=<amount to withdraw> \
--target-address=<wallet address of reciever> \
--from=<from_address, Name|address of private key> \
--chain-id=<current chain-id> \
--keyring-backend=<keyring's backend>
Transaction example:
stchaind tx pot legacy-withdraw \
--amount=100gwei \
--target-address=st1sqzsk8mplv5248gx6dddzzxweqvew8rtst96fx \
--from=st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh \
--chain-id=mesos-1 \
--keyring-backend=test \
--gas=auto \
--gas-prices=1000000000wei -y
-report🔗︎
Query volume report by epoch
Usage:
stchaind query pot report [flags]
Flags:
--epoch string the epoch when this PoT message reported.
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for report
-o, --output string Output format (text|json) (default "text")
Example:
-pot-params🔗︎
Query values set as pot parameters
Usage:
stchaind query pot params [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for params
-o, --output string Output format (text|json) (default "text")
Example:
stchaind query pot params
bond_denom: wei
community_tax: "0.020000000000000000"
initial_total_supply:
amount: "400000000000000000000000000"
denom: wei
mature_epoch: "2016"
mining_reward_params:
- block_chain_percentage_in_bp: "2000"
meta_node_percentage_in_bp: "2000"
mining_reward:
amount: "80000000000000000000"
denom: wei
resource_node_percentage_in_bp: "6000"
total_mined_valve_end:
amount: "16819200000000000000000000"
denom: wei
total_mined_valve_start:
amount: "0"
denom: wei
- block_chain_percentage_in_bp: "2000"
meta_node_percentage_in_bp: "1800"
mining_reward:
amount: "40000000000000000000"
denom: wei
resource_node_percentage_in_bp: "6200"
total_mined_valve_end:
amount: "25228800000000000000000000"
denom: wei
total_mined_valve_start:
amount: "16819200000000000000000000"
denom: wei
- block_chain_percentage_in_bp: "2000"
meta_node_percentage_in_bp: "1600"
mining_reward:
amount: "20000000000000000000"
denom: wei
resource_node_percentage_in_bp: "6400"
total_mined_valve_end:
amount: "29433600000000000000000000"
denom: wei
total_mined_valve_start:
amount: "25228800000000000000000000"
denom: wei
- block_chain_percentage_in_bp: "2000"
meta_node_percentage_in_bp: "1400"
mining_reward:
amount: "10000000000000000000"
denom: wei
resource_node_percentage_in_bp: "6600"
total_mined_valve_end:
amount: "31536000000000000000000000"
denom: wei
total_mined_valve_start:
amount: "29433600000000000000000000"
denom: wei
- block_chain_percentage_in_bp: "2000"
meta_node_percentage_in_bp: "1200"
mining_reward:
amount: "5000000000000000000"
denom: wei
resource_node_percentage_in_bp: "6800"
total_mined_valve_end:
amount: "32587200000000000000000000"
denom: wei
total_mined_valve_start:
amount: "31536000000000000000000000"
denom: wei
- block_chain_percentage_in_bp: "2000"
meta_node_percentage_in_bp: "1000"
mining_reward:
amount: "2500000000000000000"
denom: wei
resource_node_percentage_in_bp: "7000"
total_mined_valve_end:
amount: "40000000000000000000000000"
denom: wei
total_mined_valve_start:
amount: "32587200000000000000000000"
denom: wei
reward_denom: wei
Tendermint🔗︎
Tendermint subcommands
Usage:
stchaind tendermint [command]
Available Commands:
reset-state Remove all the data and WAL
show-address Shows this node's tendermint validator consensus address
show-node-id Show this node's ID
show-validator Show this node's tendermint validator info
unsafe-reset-all (unsafe) Remove all the data and WAL, reset this node's validator to genesis state
version Print tendermint libraries' version
Flags:
-h, --help help for tendermint
Global Flags:
-b, --broadcast-mode string Transaction broadcasting mode (sync|async|block) (default "sync")
--chain-id string Specify Chain ID for sending Tx (default "testnet")
--fees string Fees to pay along with transaction; eg: 10wei
--from string Name or address of private key with which to sign
--gas-adjustment float adjustment factor to be multiplied against the estimate returned by the tx simulation; if the gas limit is set manually this flag is ignored (default 1)
--gas-prices string Gas prices to determine the transaction fee (e.g. 10wei)
--home string directory for config and data (default "/home/hong/.stchaind")
--keyring-backend string Select keyring's backend (default "os")
--log_format string The logging format (json|plain) (default "plain")
--log_level string The logging level (trace|debug|info|warn|error|fatal|panic) (default "info")
--node string <host>:<port> to tendermint rpc interface for this chain (default "tcp://localhost:26657")
--trace print out full stack trace on errors
-show-address🔗︎
Shows this node's tendermint validator consensus address
Example:
-show-node-id🔗︎
Show this node's ID
Example:
-show-validator🔗︎
Show this node's tendermint validator info
Example:
stchaind tendermint show-validator
{"@type":"/cosmos.crypto.ed25519.PubKey","key":"69gothWTE9FJBZ5gBjjSNhg8y/5SsI1hBaD81Dum7lo="}
-version🔗︎
Print protocols' and libraries' version numbers against which this app has been compiled
Example:
Others🔗︎
-init nodes🔗︎
Initialize validator's and node's configuration files.
Usage:
stchaind init [moniker] [flags]
Flags:
-h, --help help for init
-o, --overwrite overwrite the genesis.json file
--recover provide seed phrase to recover existing key instead of creating
-start st-chain🔗︎
Run the full node application with Tendermint in or out of process. By default, the application will run with Tendermint in process.
Pruning options can be provided via the '--pruning' flag or alternatively with '--pruning-keep-recent', 'pruning-keep-every', and 'pruning-interval' together.
For '--pruning' the options are as follows:
default: the last 100 states are kept in addition to every 500th state; pruning at 10 block intervals nothing: all historic states will be saved, nothing will be deleted (i.e. archiving node) everything: all saved states will be deleted, storing only the current state; pruning at 10 block intervals custom: allow pruning options to be manually specified through 'pruning-keep-recent', 'pruning-keep-every', and 'pruning-interval'
Node halting configurations exist in the form of two flags: '--halt-height' and '--halt-time'. During the ABCI Commit phase, the node will check if the current block height is greater than or equal to the halt-height or if the current block time is greater than or equal to the halt-time. If so, the node will attempt to gracefully shutdown and the block will not be committed. In addition, the node will not be able to commit subsequent blocks.
For profiling and benchmarking purposes, CPU profiling can be enabled via the '--cpu-profile' flag which accepts a path for the resulting pprof file.
Usage:
stchaind start [flags]
Flags:
--abci string specify abci transport (socket | grpc) (default "socket")
--address string Listen address (default "tcp://0.0.0.0:26658")
--api.enable Defines if Cosmos-sdk REST server should be enabled
--api.enabled-unsafe-cors Defines if CORS should be enabled (unsafe - use it at your own risk)
--consensus.create_empty_blocks set this to false to only produce blocks when there are txs or when the AppHash changes (default true)
--consensus.create_empty_blocks_interval string the possible interval between empty blocks (default "0s")
--consensus.double_sign_check_height int how many blocks to look back to check existence of the node's consensus votes before joining consensus
--cpu-profile string Enable CPU profiling and write to the provided file
--db_backend string database backend: goleveldb | cleveldb | boltdb | rocksdb | badgerdb (default "goleveldb")
--db_dir string database directory (default "data")
--evm.max-tx-gas-wanted uint the gas wanted for each eth tx returned in ante handler in check tx mode (default 500000)
--evm.tracer string the EVM tracer type to collect execution traces from the EVM transaction execution (json|struct|access_list|markdown)
--fast_sync fast blockchain syncing (default true)
--genesis_hash bytesHex optional SHA-256 hash of the genesis file
--grpc-web.address string The gRPC-Web server address to listen on (default "0.0.0.0:9091")
--grpc-web.enable Define if the gRPC-Web server should be enabled. (Note gRPC must also be enabled.) (default true)
--grpc.address string the gRPC server address to listen on (default "0.0.0.0:9090")
--grpc.enable Define if the gRPC server should be enabled (default true)
--halt-height uint Block height at which to gracefully halt the chain and shutdown the node
--halt-time uint Minimum block time (in Unix seconds) at which to gracefully halt the chain and shutdown the node
-h, --help help for start
--inter-block-cache Enable inter-block caching (default true)
--inv-check-period uint Assert registered invariants every N blocks
--json-rpc.address string the JSON-RPC server address to listen on (default "0.0.0.0:8545")
--json-rpc.api strings Defines a list of JSON-RPC namespaces that should be enabled (default [eth,net,web3])
--json-rpc.block-range-cap eth_getLogs Sets the max block range allowed for eth_getLogs query (default 10000)
--json-rpc.enable Define if the gRPC server should be enabled (default true)
--json-rpc.evm-timeout duration Sets a timeout used for eth_call (0=infinite) (default 5s)
--json-rpc.filter-cap int32 Sets the global cap for total number of filters that can be created (default 200)
--json-rpc.gas-cap uint Sets a cap on gas that can be used in eth_call/estimateGas unit is gwei (0=infinite) (default 25000000)
--json-rpc.http-idle-timeout duration Sets a idle timeout for json-rpc http server (0=infinite) (default 2m0s)
--json-rpc.http-timeout duration Sets a read/write timeout for json-rpc http server (0=infinite) (default 30s)
--json-rpc.logs-cap eth_getLogs Sets the max number of results can be returned from single eth_getLogs query (default 10000)
--json-rpc.txfee-cap float Sets a cap on transaction fee that can be sent via the RPC APIs (1 = default 1 gwei) (default 1)
--json-rpc.ws-address string the JSON-RPC WS server address to listen on (default "0.0.0.0:8546")
--min-retain-blocks uint Minimum block height offset during ABCI commit to prune Tendermint blocks
--minimum-gas-prices string Minimum gas prices to accept for transactions; Any fee in a tx must meet this minimum (e.g. 0.01stos)
--moniker string node name (default "ubuntu")
--p2p.laddr string node listen address. (0.0.0.0:0 means any interface, any port) (default "tcp://0.0.0.0:26656")
--p2p.persistent_peers string comma-delimited ID@host:port persistent peers
--p2p.pex enable/disable Peer-Exchange (default true)
--p2p.private_peer_ids string comma-delimited private peer IDs
--p2p.seed_mode enable/disable seed mode
--p2p.seeds string comma-delimited ID@host:port seed nodes
--p2p.unconditional_peer_ids string comma-delimited IDs of unconditional peers
--p2p.upnp enable/disable UPNP port forwarding
--priv_validator_laddr string socket address to listen on for connections from external priv_validator process
--proxy_app string proxy app address, or one of: 'kvstore', 'persistent_kvstore', 'counter', 'e2e' or 'noop' for local testing. (default "tcp://127.0.0.1:26658")
--pruning string Pruning strategy (default|nothing|everything|custom) (default "default")
--pruning-interval uint Height interval at which pruned heights are removed from disk (ignored if pruning is not 'custom')
--pruning-keep-every uint Offset heights to keep on disk after 'keep-every' (ignored if pruning is not 'custom')
--pruning-keep-recent uint Number of recent heights to keep on disk (ignored if pruning is not 'custom')
--rpc.grpc_laddr string GRPC listen address (BroadcastTx only). Port required
--rpc.laddr string RPC listen address. Port required (default "tcp://127.0.0.1:26657")
--rpc.pprof_laddr string pprof listen address (https://golang.org/pkg/net/http/pprof)
--rpc.unsafe enabled unsafe rpc methods
--state-sync.snapshot-interval uint State sync snapshot interval
--state-sync.snapshot-keep-recent uint32 State sync snapshot to keep (default 2)
--tls.certificate-path string the cert.pem file path for the server TLS configuration
--tls.key-path string the key.pem file path for the server TLS configuration
--trace-store string Enable KVStore tracing to an output file
--transport string Transport protocol: socket, grpc (default "socket")
--unsafe-skip-upgrades ints Skip a set of upgrade heights to continue the old binary
--with-tendermint Run abci app embedded in-process with tendermint (default true)
--x-crisis-skip-assert-invariants Skip x/crisis invariants check on startup
Example:
Result:
stchaind start
11:40AM INF Unlocking keyring
11:40AM INF starting ABCI with Tendermint
11:40AM INF Starting multiAppConn service impl=multiAppConn module=proxy server=node
11:40AM INF Starting localClient service connection=query impl=localClient module=abci-client server=node
11:40AM INF Starting localClient service connection=snapshot impl=localClient module=abci-client server=node
11:40AM INF Starting localClient service connection=mempool impl=localClient module=abci-client server=node
11:40AM INF Starting localClient service connection=consensus impl=localClient module=abci-client server=node
11:40AM INF Starting EventBus service impl=EventBus module=events server=node
11:40AM INF Starting PubSub service impl=PubSub module=pubsub server=node
11:40AM INF Starting IndexerService service impl=IndexerService module=txindex server=node
11:40AM INF ABCI Handshake App Info hash="r�p=W\"��\x05v\x17K�\a �A?�/�����kÄ\x17W\x14}" height=2551 module=consensus protocol-version=0 server=node software-version=v0.8.0
11:40AM INF ABCI Replay Blocks appHeight=2551 module=consensus server=node stateHeight=2551 storeHeight=2551
11:40AM INF Completed ABCI Handshake - Tendermint and App are synced appHash="r�p=W\"��\x05v\x17K�\a �A?�/�����kÄ\x17W\x14}" appHeight=2551 module=consensus server=node
11:40AM INF Version info block=11 p2p=8 server=node tendermint_version=0.34.19
11:40AM INF This node is a validator addr=EA5F7899F5CC81675EA98BF329BB93CAE294B01C module=consensus pubKey=eYVLsz4XOB5HiadCpXxeUP48FTYrmFUGIe+hYv92E7I= server=node
11:40AM INF P2P Node ID ID=f8e9d6c5874feb1e9441380eb8e189ba88238d80 file=node/stchaind/config/node_key.json module=p2p server=node
11:40AM INF Adding persistent peers addrs=[] module=p2p server=node
11:40AM INF Adding unconditional peer ids ids=[] module=p2p server=node
11:40AM INF Add our address to book addr={"id":"f8e9d6c5874feb1e9441380eb8e189ba88238d80","ip":"0.0.0.0","port":26656} book=node/stchaind/config/addrbook.json module=p2p server=node
11:40AM INF Starting Node service impl=Node server=node
11:40AM INF Starting pprof server laddr=localhost:6060 server=node
11:40AM INF Starting RPC HTTP server on 127.0.0.1:26657 module=rpc-server server=node
11:40AM INF Starting P2P Switch service impl="P2P Switch" module=p2p server=node
11:40AM INF Starting Consensus service impl=ConsensusReactor module=consensus server=node
11:40AM INF Reactor module=consensus server=node waitSync=false
11:40AM INF Starting State service impl=ConsensusState module=consensus server=node
11:40AM INF Starting baseWAL service impl=baseWAL module=consensus server=node wal=node/stchaind/data/cs.wal/wal
11:40AM INF Starting Group service impl=Group module=consensus server=node wal=node/stchaind/data/cs.wal/wal
11:40AM INF Starting TimeoutTicker service impl=TimeoutTicker module=consensus server=node
11:40AM INF Searching for height height=2552 max=0 min=0 module=consensus server=node wal=node/stchaind/data/cs.wal/wal
11:40AM INF Searching for height height=2551 max=0 min=0 module=consensus server=node wal=node/stchaind/data/cs.wal/wal
11:40AM INF Found height=2551 index=0 module=consensus server=node wal=node/stchaind/data/cs.wal/wal
11:40AM INF Catchup by replaying consensus messages height=2552 module=consensus server=node
11:40AM INF Replay: New Step height=2552 module=consensus round=0 server=node step=RoundStepNewHeight
11:40AM INF Replay: Done module=consensus server=node
11:40AM INF Starting Evidence service impl=Evidence module=evidence server=node
11:40AM INF Starting StateSync service impl=StateSync module=statesync server=node
11:40AM INF Starting PEX service impl=PEX module=pex server=node
11:40AM INF Starting AddrBook service book=node/stchaind/config/addrbook.json impl=AddrBook module=p2p server=node
11:40AM INF Starting Mempool service impl=Mempool module=mempool server=node
11:40AM INF Starting BlockchainReactor service impl=BlockchainReactor module=blockchain server=node
11:40AM INF Saving AddrBook to file book=node/stchaind/config/addrbook.json module=p2p server=node size=0
11:40AM INF Ensure peers module=pex numDialing=0 numInPeers=0 numOutPeers=0 numToDial=10 server=node
11:40AM INF No addresses to dial. Falling back to seeds module=pex server=node
11:40AM INF starting API server... server=api
11:40AM INF Starting RPC HTTP server on [::]:1317 server=api
...
-config🔗︎
Create or query an application CLI configuration file.
Usage:
stchaind config <key> <value> [flags]
Flags:
--get print configuration value or its default if unset
-h, --help help for config
Create Configuration Example:
stchaind config keyring-backend local-test
configuration saved to $HOME/.stchaind/config/client.toml
Query Configuration Example:
-keys🔗︎
Keyring management commands. These keys may be in any format supported by the Tendermint crypto library and can be used by light-clients, full nodes, or any other application that needs to sign with a private key.
The keyring supports the following backends:
os Uses the operating system's default credentials store.
file Uses encrypted file-based keystore within the app's configuration directory.
This keyring will request a password each time it is accessed, which may occur
multiple times in a single command resulting in repeated password prompts.
kwallet Uses KDE Wallet Manager as a credentials management application.
pass Uses the pass command line utility to store and retrieve keys.
test Stores keys insecurely to disk. It does not prompt for a password to be unlocked
and it should be use only for testing purposes.
kwallet and pass backends depend on external tools. Refer to their respective documentation for more
information:
KWallet https://github.com/KDE/kwallet
pass https://www.passwordstore.org/
The pass backend requires GnuPG: https://gnupg.org/
Usage:
stchaind keys [command]
Available Commands:
add Add an encrypted private key (either newly generated or recovered), encrypt it, and save to <name> file
delete Delete the given keys
export Export private keys
import Import private keys into the local keybase
list List all keys
migrate Migrate keys from the legacy (db-based) Keybase
mnemonic Compute the bip39 mnemonic for some input entropy
parse Parse address from hex to bech32 and vice versa
show Retrieve key information by name or address
unsafe-export-eth-key **UNSAFE** Export an Ethereum private key
unsafe-import-eth-key **UNSAFE** Import Ethereum private keys into the local keybase
Flags:
-h, --help help for keys
--keyring-dir string The client Keyring directory; if omitted, the default 'home' directory will be used
--output string Output format (text|json) (default "text")
Example:
Result:
- name: user0
type: local
address: st16uzr20lx072gexwjuvg94hz3t8y73u4085s9sw
pubkey: '{"@type":"/stratos.crypto.v1.ethsecp256k1.PubKey","key":"A/wF15Wd3ogCXstE7S4Zf3DA4KXb0W7exQhP004PLTi3"}'
mnemonic: ""
- name: user1
type: local
address: st1dz20dmhjkuc2tur3amgl8t45w807a640leh8p0
pubkey: '{"@type":"/stratos.crypto.v1.ethsecp256k1.PubKey","key":"AgnhB5EkHL8+jD0/zRDR11nIpfOirTRrjgCX6uibhmDW"}'
mnemonic: ""
- name: user10
type: local
address: st1lkcrz3ktt2p7ppu9arglpqcn94pcdd9a9pmatf
pubkey: '{"@type":"/stratos.crypto.v1.ethsecp256k1.PubKey","key":"A2sZ2Z9BU9oDELC06Gj8Lfc5UycxTaPux3sEIq8sIzSW"}'
mnemonic: ""
- name: user2
type: local
address: st16czjk2ym0prgvy4gl970t84vrp96s5kayfqmf2
pubkey: '{"@type":"/stratos.crypto.v1.ethsecp256k1.PubKey","key":"AwfcJTOVWdx6ai61cy8VGJ1SdWHzwm2CCmr/+PwSpFeR"}'
mnemonic: ""
- name: user3
type: local
address: st17patveqxcq42rguc7nayr2g3jtawpzvhfmmumt
pubkey: '{"@type":"/stratos.crypto.v1.ethsecp256k1.PubKey","key":"AtFxbuB4s+2SYzImGPIBwe0H0mKCXbIPu1T63OvbgE/3"}'
mnemonic: ""
-status🔗︎
Query remote node for status.
Example:
Result:
{
"NodeInfo": {
"protocol_version": {
"p2p": "8",
"block": "11",
"app": "0"
},
"id": "16a0758d175cbf5c08d41dffa73eb5c0190869ed",
"listen_addr": "tcp://0.0.0.0:26656",
"network": "test-chain",
"version": "0.34.21",
"channels": "40202122233038606100",
"moniker": "node",
"other": {
"tx_index": "on",
"rpc_address": "tcp://127.0.0.1:26657"
}
},
"SyncInfo": {
"latest_block_hash": "697A2DB243E5191C6D85285A2ADD4924526924969C6C70FE71827C9FE41D4373",
"latest_app_hash": "E978F87BB23D351B853F5F0CF9FBBBA4464FF5D7CE3746BF3E2357F28CBCE041",
"latest_block_height": "497",
"latest_block_time": "2023-01-11T01:10:37.562405326Z",
"earliest_block_hash": "139676534FECFA507D56A06B03BD528E70ACA6D4DB6560219707011966613DE4",
"earliest_app_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
"earliest_block_height": "1",
"earliest_block_time": "2023-01-09T17:08:58.4890503Z",
"catching_up": false
},
"ValidatorInfo": {
"Address": "18A7169C1B427D994133F7B3D4504E92789DB37C",
"PubKey": {
"type": "tendermint/PubKeyEd25519",
"value": "69gothWTE9FJBZ5gBjjSNhg8y/5SsI1hBaD81Dum7lo="
},
"VotingPower": "500000"
}
}
-version🔗︎
Print the application binary version information
Usage:
stchaind version [flags]
Flags:
-h, --help help for version
--long Print long version information
-o, --output string Output format (text|json) (default "text")
Example:
-account🔗︎
Query for account by address.
Usage:
stchaind query account [address] [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for account
-o, --output string Output format (text|json) (default "text")
Example:
Result:
'@type': /stratos.types.v1.EthAccount
base_account:
account_number: "0"
address: st16uzr20lx072gexwjuvg94hz3t8y73u4085s9sw
pub_key:
'@type': /stratos.crypto.v1.ethsecp256k1.PubKey
key: A/wF15Wd3ogCXstE7S4Zf3DA4KXb0W7exQhP004PLTi3
sequence: "4"
code_hash: 0xc5d2460186f7233c927e7db2dcc703c0e500b653ca82273b7bfad8045d85a470
-tendermint-validator-set🔗︎
Get the full tendermint validator set at given height
Usage:
stchaind query tendermint-validator-set [height] [flags]
Flags:
-h, --help help for tendermint-validator-set
--limit int Query number of results returned per page (default 100)
--page int Query a specific page of paginated results (default 1)
Example:
Result:
block_height: "1"
total: "1"
validators:
- address: stvalcons1rzn3d8qmgf7ejsfn77eag5zwjfufmvmu7sn802
proposer_priority: "0"
pub_key:
type: tendermint/PubKeyEd25519
value: 69gothWTE9FJBZ5gBjjSNhg8y/5SsI1hBaD81Dum7lo=
voting_power: "500000"
-block🔗︎
Get verified data for a block at given height.
Example:
Result:
{
"block_id": {
"hash": "74E410DF477CB2B54265160FE75B48E096BCF60A29F47B825EB017FAE1BB0263",
"parts": {
"total": 1,
"hash": "9870B5AAC0D6207850D7AC4D3072D5AC17C6AF120D50EB667E054D5613B12C6D"
}
},
"block": {
"header": {
"version": {
"block": "11"
},
"chain_id": "test-chain",
"height": "150",
"time": "2023-01-10T22:19:55.918496162Z",
"last_block_id": {
"hash": "56676AC4975414BD2BF86C29CBCC9124A97AF84E1654AC41862B520595E0E6A7",
"parts": {
"total": 1,
"hash": "B919897435939A560885651505D570FE93A77EA695F0E6A24F294E507F9F1BC9"
}
},
"last_commit_hash": "3435730FE67F2F8D2092DC384C42FBD4026DF749EE49DEEBBD4042F67B96911B",
"data_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
"validators_hash": "5234BD91A3A751E055C35876578DE4A466311A80D540B59885AF68EF6D4D56DE",
"next_validators_hash": "5234BD91A3A751E055C35876578DE4A466311A80D540B59885AF68EF6D4D56DE",
"consensus_hash": "048091BC7DDC283F77BFBF91D73C44DA58C3DF8A9CBC867405D8B7F3DAADA22F",
"app_hash": "724DAFFA7A2B129A8E956D531DF4F24616E76D03976ED899F4DFBBE1FBF53B39",
"last_results_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
"evidence_hash": "E3B0C44298FC1C149AFBF4C8996FB92427AE41E4649B934CA495991B7852B855",
"proposer_address": "18A7169C1B427D994133F7B3D4504E92789DB37C"
},
"data": {
"txs": null
},
"evidence": {
"evidence": null
},
"last_commit": {
"height": "149",
"round": 0,
"block_id": {
"hash": "56676AC4975414BD2BF86C29CBCC9124A97AF84E1654AC41862B520595E0E6A7",
"parts": {
"total": 1,
"hash": "B919897435939A560885651505D570FE93A77EA695F0E6A24F294E507F9F1BC9"
}
},
"signatures": [
{
"block_id_flag": 2,
"validator_address": "18A7169C1B427D994133F7B3D4504E92789DB37C",
"timestamp": "2023-01-10T22:19:55.918496162Z",
"signature": "otYHnEyBJBM09TrcpX9CqwYGmgiJMErteqA5jUPFeplqGmIvZY7gHIzFfZh8RQKkN1umR1C0IyQypRvDQ2zJAw=="
}
]
}
}
}
-txs🔗︎
Search for transactions that match the exact given events where results are paginated. Each event takes the form of '{eventType}.{eventAttribute}={value}'. Please refer to each module's documentation for the full set of events to query for. Each module documents its respective events under 'xx_events.md'.
Usage:
stchaind query txs [flags]
Flags:
--events string list of transaction events in the form of {eventType}.{eventAttribute}={value}
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for txs
--limit int Query number of transactions results per page returned (default 30)
-o, --output string Output format (text|json) (default "text")
--page int Query a specific page of paginated results (default 1)
Example:
stchaind query txs --events 'message.sender=cosmos1...&message.action=withdraw_delegator_reward' --page 1 --limit 30
Example:
stchaind query txs \
--events 'message.sender=st1gtw399h9vfnekqsz3dg4n6mj0qgdpnh3c2n66k' \
--chain-id=mesos-1 \
--limit=20
Result:
{
"total_count": "2",
"count": "2",
"page_number": "1",
"page_total": "1",
"limit": "20",
"txs": [
{
"height": "3681",
"txhash": "EA0AB730219917533E73B1509EC38AE26614B2A8C4C4EA4E90026262127E8672",
"raw_log": "[{\"msg_index\":0,\"log\":\"\",\"events\":[{\"type\":\"message\",\"attributes\":[{\"key\":\"action\",\"value\":\"vote\"},{\"key\":\"module\",\"value\":\"governance\"},{\"key\":\"sender\",\"value\":\"st1gtw399h9vfnekqsz3dg4n6mj0qgdpnh3c2n66k\"}]},{\"type\":\"proposal_vote\",\"attributes\":[{\"key\":\"option\",\"value\":\"Yes\"},{\"key\":\"proposal_id\",\"value\":\"7\"}]}]}]",
"logs": [
{
"msg_index": 0,
"log": "",
"events": [
{
"type": "message",
"attributes": [
{
"key": "action",
"value": "vote"
},
{
"key": "module",
"value": "governance"
},
{
"key": "sender",
"value": "st1gtw399h9vfnekqsz3dg4n6mj0qgdpnh3c2n66k"
}
]
},
{
"type": "proposal_vote",
"attributes": [
{
"key": "option",
"value": "Yes"
},
{
"key": "proposal_id",
"value": "7"
}
]
}
]
}
],
"gas_wanted": "200000",
"gas_used": "38472",
"tx": {
"type": "cosmos-sdk/StdTx",
"value": {
"msg": [
{
"type": "cosmos-sdk/MsgVote",
"value": {
"proposal_id": "7",
"voter": "st1gtw399h9vfnekqsz3dg4n6mj0qgdpnh3c2n66k",
"option": "Yes"
}
}
],
"fee": {
"amount": [],
"gas": "200000"
},
"signatures": [
{
"pub_key": {
"type": "tendermint/PubKeySecp256k1",
"value": "A8h5ZfH926q3EMdHeOdT2Z5W1KDjOc3LT33quKK8uCdZ"
},
"signature": "yE56xpZ4OI3+HxQr5bklYHuAOspKlwVC7hiSKnja63khIlU+TTnEhgoRvNgYub58HVbOBtslHU7QncNKSWEEbg=="
}
],
"memo": ""
}
},
"timestamp": "2021-07-23T14:41:18Z"
},
{
"height": "4400",
"txhash": "D21722FE6C3DE53268EEAF1A9C433DACF635B2715F6B5DCFBD5EED7B28705BE8",
"raw_log": "[{\"msg_index\":0,\"log\":\"\",\"events\":[{\"type\":\"message\",\"attributes\":[{\"key\":\"action\",\"value\":\"vote\"},{\"key\":\"module\",\"value\":\"governance\"},{\"key\":\"sender\",\"value\":\"st1gtw399h9vfnekqsz3dg4n6mj0qgdpnh3c2n66k\"}]},{\"type\":\"proposal_vote\",\"attributes\":[{\"key\":\"option\",\"value\":\"Yes\"},{\"key\":\"proposal_id\",\"value\":\"9\"}]}]}]",
"logs": [
{
"msg_index": 0,
"log": "",
"events": [
{
"type": "message",
"attributes": [
{
"key": "action",
"value": "vote"
},
{
"key": "module",
"value": "governance"
},
{
"key": "sender",
"value": "st1gtw399h9vfnekqsz3dg4n6mj0qgdpnh3c2n66k"
}
]
},
{
"type": "proposal_vote",
"attributes": [
{
"key": "option",
"value": "Yes"
},
{
"key": "proposal_id",
"value": "9"
}
]
}
]
}
],
"gas_wanted": "200000",
"gas_used": "38508",
"tx": {
"type": "cosmos-sdk/StdTx",
"value": {
"msg": [
{
"type": "cosmos-sdk/MsgVote",
"value": {
"proposal_id": "9",
"voter": "st1gtw399h9vfnekqsz3dg4n6mj0qgdpnh3c2n66k",
"option": "Yes"
}
}
],
"fee": {
"amount": [],
"gas": "200000"
},
"signatures": [
{
"pub_key": {
"type": "tendermint/PubKeySecp256k1",
"value": "A8h5ZfH926q3EMdHeOdT2Z5W1KDjOc3LT33quKK8uCdZ"
},
"signature": "+w/Qhm6JdyQLXsquiKe0WCqCNjqois2Zhc76h0AphDhQZTKlpD9qlVuA/BX7gmVrmiUdqG/G4YExu8XkQSvnSg=="
}
],
"memo": ""
}
},
"timestamp": "2021-07-25T00:36:47Z"
}
]
}
-tx🔗︎
Query for a transaction by hash in a committed block.
Example:
stchaind query tx <hash>
stchaind query tx --type=acc_seq <addr>/<sequence>
stchaind query tx --type=signature <sig1_base64>,<sig2_base64...>
Usage:
stchaind query tx --type=[hash|acc_seq|signature] [hash|acc_seq|signature] [flags]
Flags:
--height int Use a specific height to query state at (this can error if the node is pruning state)
-h, --help help for tx
-o, --output string Output format (text|json) (default "text")
--type string The type to be used when querying tx, can be one of "hash", "acc_seq", "signature" (default "hash")
Example:
Result:
code: 0
codespace: ""
data: 0A1E0A1C2F636F736D6F732E62616E6B2E763162657461312E4D736753656E64
events:
- attributes:
- index: true
key: c3BlbmRlcg==
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamg=
- index: true
key: YW1vdW50
value: MjAwMDAwMDAwMDAwMDAwd2Vp
type: coin_spent
- attributes:
- index: true
key: cmVjZWl2ZXI=
value: c3QxN3hwZnZha20yYW1nOTYyeWxzNmY4NHoza2VsbDhjNWx2NWhqMnE=
- index: true
key: YW1vdW50
value: MjAwMDAwMDAwMDAwMDAwd2Vp
type: coin_received
- attributes:
- index: true
key: cmVjaXBpZW50
value: c3QxN3hwZnZha20yYW1nOTYyeWxzNmY4NHoza2VsbDhjNWx2NWhqMnE=
- index: true
key: c2VuZGVy
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamg=
- index: true
key: YW1vdW50
value: MjAwMDAwMDAwMDAwMDAwd2Vp
type: transfer
- attributes:
- index: true
key: c2VuZGVy
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamg=
type: message
- attributes:
- index: true
key: ZmVl
value: MjAwMDAwMDAwMDAwMDAwd2Vp
- index: true
key: ZmVlX3BheWVy
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamg=
type: tx
- attributes:
- index: true
key: YWNjX3NlcQ==
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamgvMw==
type: tx
- attributes:
- index: true
key: c2lnbmF0dXJl
value: N0ZtZ0Irc1RuUDVLazRxMTIxWXlWZEpKa2RFcTNHaW95ZHU4ZlRQK3B4b01DL1RsNzd1SmxDUkJhblNQN2p4MXhFandUeHQzem5HTDlLTlFMUkFBMlFBPQ==
type: tx
- attributes:
- index: true
key: YWN0aW9u
value: L2Nvc21vcy5iYW5rLnYxYmV0YTEuTXNnU2VuZA==
type: message
- attributes:
- index: true
key: c3BlbmRlcg==
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamg=
- index: true
key: YW1vdW50
value: MTAwMDAwMDAwMHdlaQ==
type: coin_spent
- attributes:
- index: true
key: cmVjZWl2ZXI=
value: c3Qxc3F6c2s4bXBsdjUyNDhneDZkZGR6enh3ZXF2ZXc4cnRzdDk2Zng=
- index: true
key: YW1vdW50
value: MTAwMDAwMDAwMHdlaQ==
type: coin_received
- attributes:
- index: true
key: cmVjaXBpZW50
value: c3Qxc3F6c2s4bXBsdjUyNDhneDZkZGR6enh3ZXF2ZXc4cnRzdDk2Zng=
- index: true
key: c2VuZGVy
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamg=
- index: true
key: YW1vdW50
value: MTAwMDAwMDAwMHdlaQ==
type: transfer
- attributes:
- index: true
key: c2VuZGVy
value: c3QxcHZ5anpsaHdycGdrbHUwMDQ0YXQ0dDZxaDdtMjNrM2tyMmdzamg=
type: message
- attributes:
- index: true
key: bW9kdWxl
value: YmFuaw==
type: message
gas_used: "88709"
gas_wanted: "200000"
height: "611"
info: ""
logs:
- events:
- attributes:
- key: receiver
value: st1sqzsk8mplv5248gx6dddzzxweqvew8rtst96fx
- key: amount
value: 1000000000wei
type: coin_received
- attributes:
- key: spender
value: st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh
- key: amount
value: 1000000000wei
type: coin_spent
- attributes:
- key: action
value: /cosmos.bank.v1beta1.MsgSend
- key: sender
value: st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh
- key: module
value: bank
type: message
- attributes:
- key: recipient
value: st1sqzsk8mplv5248gx6dddzzxweqvew8rtst96fx
- key: sender
value: st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh
- key: amount
value: 1000000000wei
type: transfer
log: ""
msg_index: 0
raw_log: '[{"events":[{"type":"coin_received","attributes":[{"key":"receiver","value":"st1sqzsk8mplv5248gx6dddzzxweqvew8rtst96fx"},{"key":"amount","value":"1000000000wei"}]},{"type":"coin_spent","attributes":[{"key":"spender","value":"st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh"},{"key":"amount","value":"1000000000wei"}]},{"type":"message","attributes":[{"key":"action","value":"/cosmos.bank.v1beta1.MsgSend"},{"key":"sender","value":"st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh"},{"key":"module","value":"bank"}]},{"type":"transfer","attributes":[{"key":"recipient","value":"st1sqzsk8mplv5248gx6dddzzxweqvew8rtst96fx"},{"key":"sender","value":"st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh"},{"key":"amount","value":"1000000000wei"}]}]}]'
timestamp: "2023-01-11T01:20:11Z"
tx:
'@type': /cosmos.tx.v1beta1.Tx
auth_info:
fee:
amount:
- amount: "200000000000000"
denom: wei
gas_limit: "200000"
granter: ""
payer: ""
signer_infos:
- mode_info:
single:
mode: SIGN_MODE_DIRECT
public_key:
'@type': /stratos.crypto.v1.ethsecp256k1.PubKey
key: Agkwb1xacHBqeqGBIqRacXgf0qKTnEBPCEtH2vTE01Ke
sequence: "3"
body:
extension_options: []
memo: ""
messages:
- '@type': /cosmos.bank.v1beta1.MsgSend
amount:
- amount: "1000000000"
denom: wei
from_address: st1pvyjzlhwrpgklu0044at4t6qh7m23k3kr2gsjh
to_address: st1sqzsk8mplv5248gx6dddzzxweqvew8rtst96fx
non_critical_extension_options: []
timeout_height: "0"
signatures:
- 7FmgB+sTnP5Kk4q121YyVdJJkdEq3Gioydu8fTP+pxoMC/Tl77uJlCRBanSP7jx1xEjwTxt3znGL9KNQLRAA2QA=
txhash: AB0EF3761603145EDC1B4121C91B51001249186E1362E7148C82E7DB12F7BDF0
-export🔗︎
Export state to JSON.
Usage:
stchaind export [flags]
Flags:
--for-zero-height Export state to start at height zero (perform preproccessing)
--height int Export state from a particular height (-1 means latest height) (default -1)
-h, --help help for export
--jail-allowed-addrs strings Comma-separated list of operator addresses of jailed validators to unjail
Example: